2025 John Deere SB21 Series SB2164

Information

2025 John Deere SB21 Series SB2164

  • Discharge chute deflection
    • Discharge chute rotation as base equipment
    • Torque-controlled impeller moves snow easily

    Features may include:

    Discharge chute deflection

    Manual adjustment of the chute angle on the spout is standard equipment on the SB21 Series Loader-Mounted Snowblowers.

    Discharge chute rotation comes as base equipment

    As base equipment on SB21 Series Loader-Mounted Snowblowers, the discharge chute rotation is controlled with an electrically controlled hydraulic motor.

    The chute rotation is powered by the hydraulic power pack and controlled with a rocker switch installed in the tractor operator station.

    Hydraulic three-point power packs required for SB21 Series Loader-Mount Snow Blowers

    The SB21 Series Loader-Mounted Snow Blower's hydraulic three-point power packs are self-contained and powered by the tractor's rear power take-off (PTO). They are Category 1 and iMatch™ quick-hitch compatible.

    • HP2025 Hydraulic Power Pack is required for model SB2164 Snow Blower.
    • HP2134 Hydraulic Power Pack is required for model SB2176 Snow Blower.

    Add suitcase weights (shown above) for additional ballast to the rear of the tractor.

    Torque-controlled impeller moves excess snow easily

    Frontier™ SB21 Series Loader-Mounted Snowblowers monitor the torque applied to the impeller, which is an industry-exclusive feature.

    The speed of the auger slows down when maximum torque is sensed, alerting the operator to slow ground speed. This allows the impeller to move away excess snow.

    This feature reduces plugging during operation.

    Choose from a 162.6-cm or 193-cm (64-in. or 76-in.) working width to move large volumes of snow
    • The SB21 Series Loader-Mounted Snowblowers come in a 162.6-cm or 193-cm (64-in. or 76-in.) working width, a 152.4-cm or 68.6-cm (60-in. or 27-in.) working height, and a 38.1-cm (15-in.) diameter auger. These features make quick work of snow-removal jobs.
    • Steel skid shoes are adjustable and replaceable. The cutting edge is also replaceable.

Photos

Highlights

  • Glencoe, Ontario
  • 2025
  • John Deere
  • SB21 Series SB2164
  • Available
  • Power pack: 97 cm (38 in.) | impeller: 18 cm (7 in.) | 5.1 cm (2 in.)
  • Snow blower machine: 152 cm (60 in.) / Power pack: 132 cm (52 in.)

Specifications

  • 2025
  • John Deere
  • SB21 Series
  • SB2164
  • General
  • 18.6-25.4 kW (25-34 hp) | 540 rpm
  • 200 rpm
  • Labor hours: 2.5 to 3 hours
  • Impeller: 680 rpm
  • Flow @ 3000 psi (207 bar): At 207 bar: 133.60 L/min / At 3000 psi: 16 gpm
  • Fan relief valve setting: 207 bar (3000 psi) | Auger relief valve setting: 138 bar (2000 ps)
  • Chute Diameter: 21 cm (8.25 in.) | End plate thickness: 0.47 cm (0.1875 in.) | Back plate thickness: 0.3 cm (0.12 in.) | Fan housing thickness: 0.3 cm (0.12 in.) | Fan blade thickness: 0.64 cm (0.25 in.) | Side panel bottom thickness: 1.27 cm (0.5 in.)
  • Snow blower machine: 152 cm (60 in.) / Power pack: 132 cm (52 in.)
  • Snow blower: 163 cm (64 in)
  • Power pack: 97 cm (38 in.) | impeller: 18 cm (7 in.) | 5.1 cm (2 in.)
  • 61 cm (24 in.) | shaft: 3 cm (1.25 in.)
  • 1 cm (0.3125 in.)
  • 38 cm (15 in.)
  • Thickness: 1 cm (0.375 in.)
  • Rotation type: Hydraulic | auger type: Single | Impeller Blades: Four
  • Snow blower: 476 kg (1,050 lb) / Power pack: 243 kg (535 lb)
  • Snow blower: 363 kg (800 lb) / Power pack: 243 kg (535 lb)
  • Two-part
  • Deflector: Manual
  • Replaceable, reversible
  • 1 year