2025 John Deere PrecisionCut™ Fairway 6700A

Information

2025 John Deere PrecisionCut™ Fairway 6700A

PrecisionCut™ Fairway Mower

24.7 hp FT4 compliant Liquid-Cooled Diesel Engine

22” QA7 Cutting Units for a 100” total Width of Cut

3-wheel, smooth tire configuration with standard GRIP All-Wheel Drive

Passcode-protected TechControl display

Features may include:

  • 18.4-kW (24.7-hp) Final Tier 4 (FT4) diesel engine offers plenty of power for mowing
  • Three-wheel stance and smooth tires for excellent maneuverability and after-cut appearance
  • TechControl display maximizes performance and uptime by allowing more control in operation and diagnostics

Photos

Highlights

  • Glencoe, Ontario
  • 2025
  • John Deere
  • PrecisionCut™ Fairway 6700A
  • Diesel Up to B20 compliant
  • Available
  • Mowing position: 113 in. (287 cm)
  • with ROPS: 217.3 cm (85.6 in.) | Construction 6.3 to 50.8 mm (0.25 to 2 in.)

Specifications

  • 2025
  • John Deere
  • PrecisionCut™ Fairway
  • 6700A
  • Fairway Mowers
  • Liquid centrifugal pump; forward machine location for optimum cooling
  • Three
  • 1.267 L (77.32 cu in.)
  • Indirect Inject Diesel
  • Maximum rated horsepower At 3000 rpm: 24.7 hp (18.4 kW)
  • United States and Canada Final Tier 4, EU Stage V
  • High idle 3200 rpm
  • 2-stage dry element
  • Diesel Up to B20 compliant
  • Electric Switch on Command Arm
  • Forward/reverse: 2-pedal electronic control of eHydro system
  • Hydraulic power with double acting steering cylinder | tilt: Left Foot operated for easy adjustment
  • Hand throttle
  • Internal hydraulic wet disc brakes with dynamic braking through closed loop hydrostatic system
  • Electric Switch on Command Arm for Internal Wet Disk Brakes
  • Front drive: 26.5x14-12 smooth
  • Steering: 24x13-12 smooth
  • 69 kPa (10 psi)
  • Ground speed: Mowing 0 to 12.8 km/h (0 to 8.0 mph) 4WD mow / Transport: 0 to 16.1 km/h (0 to 10.0 mph) / Reverse: 0 to 9.7 km/h (0 to 6.0 mph) | Frequency of clip (FOC Reels) OR Blade tip speed (decks): 10- Blade: 1.04 mm/km/h / 10- Blade: 0.066 in./mph / 8-Blade: 1.30 mm/km/h / 8-Blade: 0.083 in./mph
  • Drive: Axial piston, electronically controlled hydrostatic traction pump; dual gear pumps for steering, lift, mow, and charge
  • Quick Adjust QA5: 55.9 cm (22 in.) | Frequency of clip (FOC Reels) OR Blade tip speed (decks) Rollers Front and rear: 3 in. (76.2 mm) | Reel diameter: 17.8 cm (7 in.)
  • Total: 254 cm (100 in.)
  • with ROPS: 217.3 cm (85.6 in.) | Construction 6.3 to 50.8 mm (0.25 to 2 in.)
  • 307.2 cm (121 in.)
  • Mowing position: 113 in. (287 cm)
  • 219 cm (86.2 in.)
  • 37.8 L (10 U.S. gal.)
  • 60.6 L (16 U.S. gal.)
  • Cutting units lowered: 1181 kg (2598 lb)
  • Operator display: TechControl Display: Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; Loadmatch™ and ON/OFF Cruise Control Use selection: all settings are pass code protected | Storage: Cup holder; two-way radio; large operator storage located on left hand side of operator station | Cutting Units number: five
  • Mower: One-touch single handle
  • Suspension seat with seat belts and arm rest; fore/aft adjustment; weight and lumbar adjustment
  • Two-year limited