2025 John Deere PrecisionCut™ Fairway 7700A

Information

2025 John Deere PrecisionCut™ Fairway 7700A

PrecisionCut™ Fairway Mower

TechControl™ Display locks in performance, and uptime

Set mowing turn speed to reduce scuffing

AutoPedal™ lowers fuel consumption and noise

Final Tier 4 without sacrificing horsepower

Features may include:

  • QA7 electric reel drive system meets customer needs for reduced hydraulic leaks, sound levels, and fuel consumption
  • 56-Volt, 240 amp Smart alternator and electric reel motors provide power for mowing, verticutting, and scalping
  • TechControl display maximizes performance and uptime by allowing more control in operation and diagnostics
  • AutoPedal™ feature lowers sound levels and fuel consumption during transport
  • eHydro™ hydrostatic pump and large-capacity wheel motors for serious hill-climbing capabilities

Photos

Highlights

  • Glencoe, Ontario
  • 2025
  • John Deere
  • PrecisionCut™ Fairway 7700A
  • Diesel; up to B20 compliant
  • Available
  • Mowing position: 295 cm (116 in.)
  • with ROPS: 224 cm (88 in.) | of cut: Ten-blade QA7: 6.3-50.8 mm / Ten-blade QA7: 0.25-2.0 in. / Eight-blade QA7: 6.3-50.8 mm / Eight-blade QA7: 0.25-2.0 in.

Specifications

  • 2025
  • John Deere
  • PrecisionCut™ Fairway
  • 7700A
  • Fairway Mowers
  • Liquid centrifugal pump; forward machine location for optimum cooling
  • Three
  • 1.568 L (95.69 cu in.)
  • Direct Inject Turbocharged Diesel
  • Maximum rated horsepower At 2800 rpm: 31 kW (41.6 hp)
  • United States and Canada Tier 4
  • 2-stage dry element
  • Actual Fuel usage will vary depending on course conditions, operation, turf and fuel quality: 25% load: 2.8 L/hr (0.75 gph) / 40% load: 4.32 L/hr (1.14 gph) / 50% load: 5.22 L/hr (1.38 gph)
  • Diesel; up to B20 compliant
  • Electric Switch on Command Arm
  • Forward/reverse: 2-pedal
  • Hydraulic power with double acting steering cylinder | tilt: Left Foot operated for easy adjustment
  • Automatic controls with AutoPedal foot controls; manual control through TechControl display
  • Internal hydraulic wet disc brakes with dynamic braking through closed loop hydrostatic system
  • Electric Switch on Command Arm for Internal Wet Disk Brakes
  • Front drive: 26.5x14-12 turf
  • Steering: 20x12X10-8 turf
  • 69 kPa (10 psi)
  • Ground speed: Mowing 0 to 12.8 km/h (0 to 8.0 mph) / Transport: 0-18.5 km/h (0-11.5 mph) / Reverse: 0-6.4 km/h (0-5 mph) | Frequency of clip (FOC Reels) OR Blade tip speed (decks): 10 Blade: 1.06 mm/km/h / 10 Blade: 0.067 in./mph / 8 Blade: 1.33 mm/km/h / 8 Blade: 0.084 in./mph
  • Drive: Tandem gear pump
  • Quick Adjust QA5: 55.9 cm (22 in.) | Frequency of clip (FOC Reels) OR Blade tip speed (decks) Rollers Front and rear: 7.6 mm (3 in.) | Reel diameter: 17.8 cm (7 in.)
  • Total: 254 cm (100 in.)
  • with ROPS: 224 cm (88 in.) | of cut: Ten-blade QA7: 6.3-50.8 mm / Ten-blade QA7: 0.25-2.0 in. / Eight-blade QA7: 6.3-50.8 mm / Eight-blade QA7: 0.25-2.0 in.
  • 323 cm (127 in.)
  • Mowing position: 295 cm (116 in.)
  • 287 cm (113 in.)
  • 37.8 L (10 U.S. gal.)
  • 60.6 L (16 U.S. gal.)
  • Cutting units lowered: 1202 kg (2650 lb)
  • Operator display: TechControl Display; Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; Loadmatch™ and ON/OFF Cruise Control Use selection: all settings are pass code protected | Storage: Cup holder; two-way radio; large operator storage located on left hand side of operator station | Cutting Units number: five
  • Mower: One-touch single handle
  • Suspension seat with seat belts and arm rest; fore/aft adjustment; weight and lumbar adjustment
  • Two-year limited