2025 John Deere PrecisionCut™ Fairway 8700A
- Year 2025
- Make John Deere
- Model PrecisionCut™ Fairway
2025 John Deere PrecisionCut™ Fairway 8700A
2025 John Deere PrecisionCut™ Fairway 8700A
PrecisionCut™ Fairway MowerTechControl™ Display locks in performance, and uptime
Set mowing turn speed to reduce scuffing
AutoPedal™ lowers fuel consumption and noise
Final Tier 4 without sacrificing horsepower
Features may include:
- TechControl display maximizes performance and uptime by allowing more control in operation and diagnostics
- eHydro™ hydrostatic pump and large-capacity wheel motors for serious hill-climbing capabilities
- GRIP All-Wheel Drive Traction System provides superior traction by reducing wheel slip
- Double-acting, single-rod hydraulic steering cylinder for lines as straight as a greens mower
- Tires sized for proper weight distribution and a low ground pressure
Engine
Cooling
Liquid centrifugal pump; forward machine location for optimum cooling
Cylinder Liners
Four
Displacement
2.091 L (127.6 cu in.)
Engine Type
Direct Inject Turbocharged
Engine Power
Maximum rated horsepower At 2800 rpm: 41.1 kW (55.1 hp)
Emissions
United States and Canada Tier 4
Air Cleaner
2-stage dry element
Fuel System
Fuel Usage, 100% Load
Actual Fuel usage will vary depending on course conditions, operation, turf and fuel quality: 25% load: 3.63 L/hr (0.96 gph) / 40% load: 5.64 L/hr (1.49 gph) / 50% load: 6.85 L/hr (1.81 gph)
Fuel Type
Diesel; up to B20 compliant
PTO
PTO Type
Electric Switch on Command Arm
Drivetrain
Drivetrain
Forward/reverse: 2-pedal
Steering
Hydraulic power with double acting steering cylinder | tilt: Left Foot operated for easy adjustment
Throttle
Automatic controls with AutoPedal foot controls; manual control through TechControl display
Brakes
Brake System Type
Internal hydraulic wet disc brakes with dynamic braking through closed loop hydrostatic system
Parking Brake
Electric Switch on Command Arm for Internal Wet Disk Brakes
Wheels & Tires
Tires, Front Specification
Front drive: 26.5x14-12 turf
Tires, Rear Specification
Steering: 20x12X10-8 turf
Operational
Ground Pressure
69 kPa (10 psi)
Operating Speed
Ground speed: Mowing 0 to 12.8 km/h (0 to 8.0 mph) / Transport: 19.2 km/h (12 mph) / Reverse: 9.6 km/h (6 mph) | Frequency of clip (FOC Reels) OR Blade tip speed (decks): 10 Blade: 1.06 mm/km/h / 10 Blade: 0.067 in./mph / 8 Blade: 1.33 mm/km/h / 8 Blade: 0.084 in./mph
Hydraulics
Pump Type
Drive: Tandem gear pump
Dimensions
Dimensions
Quick Adjust QA5: 55.9 cm (22 in.) | Frequency of clip (FOC Reels) OR Blade tip speed (decks) Rollers Front and rear: 7.6 mm (3 in.) | Reel diameter: 17.8 cm (7 in.)
Cutting Width
Total: 254 cm (100 in.)
Height
with ROPS: 224 cm (88 in.) | of cut: Ten-blade QA7: 6.3-50.8 mm / Ten-blade QA7: 0.25-2.0 in. / Eight-blade QA7: 6.3-50.8 mm / Eight-blade QA7: 0.25-2.0 in.
Length
323 cm (127 in.)
Width
Mowing position: 287 cm (113 in.)
Transport Width
221 cm (87 in.)
Capacities
Hydraulic Capacity
37.8 L (10 U.S. gal.)
Fuel Capacity
60.6 L (16 U.S. gal.)
Weights
Weight, In Running Order
Cutting units lowered: Eight-blade QA7 cutting units lowered: 1254 kg / Eight-blade QA7 cutting units lowered: 2765 lb
Features
Features
Operator display: TechControl Display; Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; Loadmatch™ and ON/OFF Cruise Control Use selection: all settings are pass code protected | Storage: Cup holder; two-way radio; large operator storage located on left hand side of operator station | Cutting Units number: five
Lift Mechanism
Mower: One-touch single handle
Seat Type
Suspension seat with seat belts and arm rest; fore/aft adjustment; weight and lumbar adjustment
Warranty
Warranty
Two-year limited