2025 John Deere PrecisionCut™ Fairway 8900A

Information

2025 John Deere PrecisionCut™ 8900A

PrecisionCut™ Fairway Mower

The 8900A features a width of 114 to 130 inches depending on cutting unit size, giving more productivity in terms of acres mowed per hour.

Another productive advantage of the 8900A is the 8 miles per hour mowing speed.

Be productive but carry a light footprint: the 8900A comes in significantly lighter than its main competitor.

Versatility is a hallmark: 8900A has 26" and 30" verticutters and large capacity reel motors for scalping during over-seed operations.

Features may include:

  • TechControl display maximizes performance and uptime by allowing more control in operation and diagnostics
  • eHydro™ hydrostatic pump and large-capacity wheel motors for serious hill-climbing capabilities and lower maintenance
  • GRIP all-wheel drive traction system provides superior traction by reducing wheel slip
  • Double-acting, single-rod hydraulic steering cylinder for lines as straight as a greens mower
  • Low machine weight and tires sized for proper weight distribution, traction, and low ground pressure

Photos

Highlights

  • Glencoe, Ontario
  • 2025
  • John Deere
  • PrecisionCut™ Fairway 8900A
  • Diesel; up to B20 compliant
  • Available
  • Mowing position: QA7 (66 cm / 26 in.) 3275 mm / QA7 (66 cm / 26 in.) 129 in. / QA7 (76 cm / 30 in.) 3695 mm / QA7 (76 cm / 30 in.) 145 in.
  • with ROPS: 2200 mm (87 in.) | of cut: QA7: 6.3-50.8 mm / QA7: 0.25-2.0 in.

Specifications

  • 2025
  • John Deere
  • PrecisionCut™ Fairway
  • 8900A
  • Fairway Mowers
  • Liquid centrifugal pump; forward machine location for optimum cooling
  • Four
  • 2.091 L (127.6 cu in.)
  • Direct Inject Turbocharged
  • Maximum rated horsepower At 2800 rpm: 41.1 kW (55.1 hp)
  • United States and Canada Tier 4
  • Key start
  • 2-stage dry element
  • Actual Fuel usage will vary depending on course conditions, operation, turf and fuel quality: 25% load: 3.63 L/hr (0.96 gph) / 40% load: 5.64 L/hr (1.49 gph) / 50% load: 6.85 L/hr (1.81 gph)
  • Diesel; up to B20 compliant
  • Electric Switch on Command Arm
  • Forward/reverse: 2-pedal
  • Hydraulic power with double acting steering cylinder | tilt: Left Foot operated for easy adjustment
  • Automatic controls with AutoPedal foot controls; manual control through TechControl display
  • Internal hydraulic wet disc brakes with dynamic braking through closed loop hydrostatic system
  • Electric Switch on Command Arm for Internal Wet Disk Brakes
  • Front drive: 26.5x14-12 turf
  • Steering: 20x12X10-8 turf
  • 83 kPa (12 psi)
  • Ground speed: Mowing 0 to 12.8 km/h (0 to 8.0 mph) / Transport: 19.2 km/h (12 mph) / Reverse: 9.6 km/h (6 mph) | Frequency of clip (FOC Reels) OR Blade tip speed (decks): 10 Blade: 1.06 mm/km/h / 10 Blade: 0.067 in./mph / 8 Blade: 1.33 mm/km/h / 8 Blade: 0.084 in./mph
  • Drive: Tandem gear pump
  • Quick Adjust QA7: 66 or 76 cm / Quick Adjust QA7: 26 or 30 in. | Frequency of clip (FOC Reels) OR Blade tip speed (decks) Rollers Front and rear: 76.2 mm (3 in.) | Reel diameter: 17.8 cm (7 in.)
  • Total: 289.5 or 330.2 cm (114 or 130 in.)
  • with ROPS: 2200 mm (87 in.) | of cut: QA7: 6.3-50.8 mm / QA7: 0.25-2.0 in.
  • 2825 mm (111 in.)
  • Mowing position: QA7 (66 cm / 26 in.) 3275 mm / QA7 (66 cm / 26 in.) 129 in. / QA7 (76 cm / 30 in.) 3695 mm / QA7 (76 cm / 30 in.) 145 in.
  • 1585 mm (62.4 in.)
  • Quick Adjust QA7 (with 66 cm / 26 in.): 2194 mm / Quick Adjust QA7 (with 66 cm / 26 in.): 86.38 in. / Quick Adjust QA7 (with 76 cm / 30 in.): 2385 mm / Quick Adjust QA7 (with 76 cm / 30 in.): 93.90 in.
  • 37.8 L (10 U.S. gal.)
  • 60.6 L (16 U.S. gal.)
  • Cutting units lowered: Full fluids; no operator Quick Adjust QA7 (with 66 cm / 26 in.) cutting units lowered: 1239 kg / Full fluids; no operator Quick Adjust QA7 (with 66 cm / 26 in.) cutting units lowered: 2725 lb / Full fluids; no operator Quick Adjust QA7 (with 76 cm / 30 in.) cutting units lowered: 1270 kg / Full fluids; no operator Quick Adjust QA7 (with 76 cm / 30 in.) cutting units lowered: 2795 lb
  • Operator display: TechControl Display; Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; Loadmatch™ and ON/OFF Cruise Control Use selection: all settings are pass code protected | Storage: Cup holder; two-way radio located in Command Arm; large operator storage located on left hand side of operator station | Cutting Units number: five | Backlapping: Standard; pressure sensing flow compensating backlap valve; manual reel speed adjustment
  • Bedknife: Reel to bedknife
  • Mower: One-touch single handle
  • Air Ride suspension seat with seat belts and arm rest; fore/aft adjustment; weight and lumbar adjustment
  • Two-year limited