Fulline Farm and Garden Equipment LTD

  • 21911 Simpson Rd
  • Glencoe, ON N0L 1M0
  • Call Us: (519) 287-2840
  • https://www.fullinefarm.com/
Print This Page

2025 John Deere 1570 TerrainCut™ 72 in. Fastback™ rear discharge

Information

2025 John Deere 1570 TerrainCut™ 72 in. Fastback™ rear discharge

TerrainCut™ Front Mower

7-Iron™ PRO Side Discharge or Fastback™ Rear Discharge Deck

Diesel Engine

Compatible with select front blade, snow blower and broom attachments

Features may include:

  • Diesel engine has high-quality features to minimize operating cost
  • The 1500 Series TerrainCut™ Front Mowers are powered by liquid-cooled, 3-cylinder diesel engines.
  • These engines feature low levels of exhaust and emissions, reduced noise levels, and excellent fuel economy. They also meet the necessary Environmental Protection Agency (EPA) Tier 4 emissions requirements.
  • The 1570, 1575, 1580, and 1585 models are biodiesel compatible from the factory up to B20.
  • Key features of the engine include:
  • Economical cast-in block cylinder design for good cooling and long life
  • Indirect fuel injection (1550)
  • Direct fuel injection (1570, 1575, 1580, 1585)
  • Injects fuel directly on top of pistons for more efficient combustion
  • Delivers more horsepower per gallon of fuel
  • Improves starting
  • Develops more horsepower per gallon of fuel and improves starting
  • Aluminum alloy pistons with built-in steel struts are lightweight to reduce connection rod bearing loads and provide good heat transfer characteristics
  • Design permits tighter tolerances and neutralizes expansion of the piston, thereby reducing blow-by gas and noise from the piston slap
  • Higher top rings on the piston and a thinner head gasket greatly reduce the volume of unburned waste gases and increase combustion efficiency
  • Timing gears and injector drive gears utilize helical profile gears to help lower engine noise; gear teeth have a newly designed roll-off profile, giving almost no clash, no noise, and no backlash
  • Fuel filter with replaceable element
  • Full-pressure intake manifold provides quick starts in temperatures down to 0°F (-18°C)
  • Auto-bleed fuel system – there is no need to prime the system if the tractor runs out of fuel; the system self-primes the injection pump, lines, and injectors, providing fast fuel recovery
  • Key start and shutoff eliminates fuel shut-off knob; electric solenoid shuts fuel supply off immediately when key is turned off
  • See-through coolant recovery tank permits operator to check coolant level without removing radiator cap
  • Enclosed engine compartment to keep out debris and lower sound levels
  • Sealed radiator compartment to keep trash and debris on outside of hood
  • Excellent torque for plenty of lugging power when operating in tough mowing conditions
  • Full-pressure lubrication for positive lubrication, even when operating on slopes
  • Dual-element, dry-type, replaceable air cleaner completely sealed for effective cleaning
  • 90 percent to 95 percent of dirt ejected before it reaches the paper element
  • Secondary safety element for additional filtering
  • Progressive-type air restriction indicator to let operator know when the filter needs servicing
  • Automotive-type alternator for plenty of charge to the battery and power for accessories
  • 75 amp for open-station models
  • 95 amp for ComfortCab models
  • Automatic initiation of air heater for easier cold-weather starting
  • Automotive-sensing system tells operator when engine is ready to start
  • Fuel tank features:
  • 16-U.S. gal. (60.6-L) capacity provides a 10-hour run time.
  • Top draw provides clean fuel.

Photos

Highlights

  • Glencoe, Ontario
  • 2025
  • John Deere
  • 1570 TerrainCut™ 72 in. Fastback™ rear discharge
  • Hydrostatic 2WD
  • Diesel (B20 compatible)
  • Available
  • Cutting: 1-6 in. (2.54-15.24 cm)

Specifications

  • 2025
  • John Deere
  • 1570 TerrainCut™
  • 72 in. Fastback™ rear discharge
  • Riding
  • 3TNV88C
  • Gross PS: 37.4 hp (27.5 kW)
  • 3,000 rpm
  • Three
  • 100.2 cu in. (1.64 L)
  • At 1,950 rpm: 80.4 lb-ft (109 Nm)
  • Liquid
  • Dual element dry type | Air restriction indicator: Standard
  • Direct
  • Diesel (B20 compatible)
  • Hydrostatic 2WD
  • Speed and direction control: Two-pedal foot | Hi/Lo range: No, single speed transmission
  • Hydraulic cylinder | Turns lock-to-lock: 2 maximum, 1.5 minimum
  • Internal wet disk | Individual turn brakes: Standard | Master brake: Standard, locking
  • Drive: 23x10.5-12 | Steering: 2WD: 18x8.5-8 / 4WD: 18x8.5-10
  • Type Flat free / Size: 11x4-5
  • 12 V
  • 75 amp
  • Automotive type
  • Travel speed: Hi forward: 0-12 mph (0-19.3 km/h) / Hi reverse: 0-5 mph (0-8 km/h) | Blade tip: 18,000 fpm (5,486 m/min)
  • 5.1 U.S. gpm (19.3 L/min)
  • Open center | Spool valve: Front lift, standard
  • Two
  • Mower deck size: 72 in. (183 cm)
  • Less mower deck: 86.7 in. (220.2 cm)
  • Cutting: 1-6 in. (2.54-15.24 cm)
  • With ROPS: 82.7 in. (210 cm) | With ROPS folded: 58 in. (147 cm)
  • Narrow 23x10.5 tires: 51.8 in. (131.6 cm) | Wide 23x10.5 tires: 60.3 in. (153.2 cm)
  • 72 in. (183 cm)
  • 6.5 in. (16.5 cm)
  • 49.2 in. (125 cm)
  • 7 gauge / 0.18 in. / 4.6 mm
  • 16 U.S. gal. (60.6 L)
  • 8 U.S. qt (7.6 L)
  • Net, 2WD without mower or fuel: 1,800 lb (816 kg) | Net, 4WD without mower or fuel: 1,960 lb (889 kg)
  • ROPS: Standard (folding) | Belt tensioning: Spring loaded
  • One-piece stamped steel; 7-Iron PRO
  • 24 months