2022 John Deere 9R Series Scraper Special 9R 590
- Year 2022
- Make John Deere
- Model 9R Series Scraper Special
2022 John Deere 9R Series Scraper Special 9R 590
- Engine HP1: 649 Max / 590 hp Rated
- e18™ PowerShift Transmission
- Choice of three different cab and visibility packages
- HydraCushion™ Suspension
Features may include:
PowerTech™ 13.6L (827-cu in.) engine: real world usability, not just power on paper- The muscle to handle heavy draft disks and rippers, power-hungry air seeders and planters, and large transport loads like grain carts and slurry wagons. The durable design and heavy-duty components you can depend on when you need to get in and get out. All in a Final Tier 4 (FT4) and Stage V compliant package. You get real-world power with the purpose-built 13.6L (827-cu in.) engines from John Deere Power Systems, standard in the 291 to 440 engine kW (390 to 590 engine hp) 9 Series Tractors.
- We developed our newest power plant from a clean sheet of paper, starting with stronger castings, beefier bearings, and more robust internal components, all designed to meet the high demands of field operations. We replaced the fuel injectors with a high-pressure common rail (HPCR) fuel system and eliminated the diesel particulate filter (DPF) to boost to fuel efficiency and lower operation and maintenance costs. Integrated coolant and oil passages, along with a new belt-driven water pump, eliminate potential leak points and allow for a less-crowded engine compartment, improving serviceability and reducing debris accumulation.
- In redesigning the engine, we also gave it:
- Hydraulic valve lash adjusters to maintain valve-lash settings during engine operation, reduce valve train noise and wear, and allow for greater fuel efficiency.
- A hydraulic fan drive for improved cooling capacity with no required maintenance.
- A new integrated wiring harness design featuring a modular layout for reduced vibration, greater reliability, and easier service and diagnostics.
- A rear gear train that integrates fully into the cast-iron block, reducing tiresome engine noise and improving the durability of the crankshaft damper.
- Combination sensors where possible, meaning fewer sensors, connectors, and wires.
- A powerful engine brake that allows operators to use the engine to control tractor and implement speeds while transporting or traveling downhill, reducing wear on the drivetrain brake components.
- It all adds up to:
- 14 percent more power and 11 percent more torque
- 3 percent lower fuel consumption
- 10 percent lighter
- 27 percent reduction in mean repair time and an estimated $8,308 savings in service costs over the life of the engine
Engine
							Engine Manufacturer
							John Deere
						
						
							Engine Power
							Rated: 590 hp (434 kW) | Maximum: 649 hp (477 kW) | Power boost: 10 percent
						
						
							Engine Torque
							Peak At 1600 rpm: 2008 lb-ft (2723 Nm) | PTO torque rise: 38 percent
						
						
							Displacement
							827 cu in. (13.6 L)
						
						
							Rated Engine Speed
							2100 rpm
						
						
							Engine Type
							Inline, wet-sleeve cylinder liners with four valves in-head
						
						
							Cylinder Liners
							6-cylinder
						
						
							Emissions
							Level: Final Tier 4 (FT4) | After treatment type: Diesel oxidation catalyst (DOC)/selective catalytic reduction (SCR)
						
						
							Aspiration
							Dual series turbocharger with fixed geometry first stage and wastegated second stage; air-to-air aftercooling and cooled exhaust gas recirculation (EGR)
						
						Fuel System
							Fuel Type
							Diesel
						
						PTO
							PTO Type
							Independent 44 mm (1.75 in.) 20-spline, 1000 rpm | actuation: Electrohydraulic
						
						Drivetrain
							Transmission
							John Deere e18™ 18-speed PowerShift™ with Efficiency Manager™: 25 mph (40 km/h)
						
						
							Final Drive
							Inboard planetary with double-reduction axle
						
						
							Drive System
							Camso™ 3500 and 6500 Ag Series - reinforced drive lug technology
						
						
							Differential Lock
							Rear: Full-locking electrohydraulic / front: Full-locking electrohydraulic
						
						
							Steering
							Hydraulic power steering
						
						Battery
							Battery
							12 V
						
						Electric
							Electrical
							Total cold cranking amps: 3 x 925 CCA / Total: 2775 CCA
						
						
							Alternator
							Size: 250 amp
						
						Operational
							Operating Conditions
							Interval for engine oil change: 500 hours | Interval for hydraulic/transmission oil change: 1500 hours | Interval for engine coolant change: 6000 hours
						
						Hydraulics
							Hydraulic Type
							Closed-center, pressure-and-flow compensated | Number of rear selective control valves (SCVs): Four to eight factory or field installed / Base: four 1.3-cm (1/2-in.) couplers | SCV control: Electronic
						
						
							Hydraulic Flow
							Available at a single rear SCV: 1.3-cm (1/2-in.) couplers: 35 gpm (132 L/min) / 1.9-cm (3/4-in.) couplers: 42 gpm (159 L/min)
						
						
							Hydraulic Pump
							Rated output: 55 gpm (208 L/min)
						
						Dimensions
							Track Width
							30 in. (762 mm)
						
						
							Dimensions
							Tread spacing: Narrow undercarriage: 2032, 2235, or 3048 mm (80, 88, or 120 in.) / Wide undercarriage: 87 in. (2218 mm) | Display Generation 4 4600 CommandCenter™: 10 in. (25.4 cm) | Cab glass area: 71.47 sq ft (6.64 m2) | Drawbar clearance: 20.7 in. (527 mm) | Rear axle: 4.72 x 120 in. (120 x 3048 mm)
						
						
							Wheelbase
							154 in. (3912 mm)
						
						
							Overall Length
							With front weights, excluding hitch and coupler: 312.8 in. (7945 mm)
						
						
							Turning Radius
							With brakes Group 47 or Group 48 tires: 19.8 ft (6.035 m)
						
						Capacities
							Fuel Capacity
							400 U.S. gal. (1514 L) | Diesel exhaust fluid (DEF) tank: 31.7 U.S. gal. (120 L)
						
						
							Hitch Lift Capacity
							Rear category (SAE designation): Category 4N: 15,000 lb (6804 kg) / Category 4N: 20,000 lb (9072 kg) | Maximum lift capacity behind lift points: Category 4N/4: 20,000 lb (9072 kg)
						
						
							Drawbar Capacity
							Maximum vertical load: 12,000 lb (5440 kg)
						
						
							Volume
							Inner cab: 115 cu ft (3.27 m3)
						
						
							Oil capacity
							Crankcase volume: 16.9 U.S. gal. (64 L)
						
						
							Cooling System
							14.9 U.S. gal. (56.5 L)
						
						
							Hydraulic Capacity
							Transmission-hydraulic system: With 3-point hitch and PTO: 59 U.S. gal. (223 L)
						
						Weights
							Weight
							Base machine: 45,980 lb (20,856 kg) | Maximum ballast level: 54,000 lb (24,494 kg)
						
						
							Weight, As Shipped
							Approximate, Open;Cab: 20,856 kg (45,980 lb)
						
						Lights and Safety
							Lighting
							Working: 18 halogen | Type of bulb in headlight (Halogen, Zenon, LED): halogen, 65 W
						
						Features
							Features
							Sensing type: Electrohydraulic with draft sensing | Drawbar category: Category 5 | Midrollers: Two | Radio: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna | Guidance: Integrated AutoTrac™ | Telematic: Available with JDLink™ hardware, activations, and Ethernet harnesses (availability dependent upon destination)
						
						
							Seat Type
							Degree of seat swivel, left hand 25 degree (angle) / Degree of seat swivel, right hand 40 degree (angle) / Air suspension
						
					 
			