2024 Landoll B40AC-HL / B50AC-HL Forklift B50AC-HL

Current Landoll Material-Handling Bendi B40AC-HL-B50AC-HL-Forklift

Swipe to View More

Year 2024
Make Landoll
Model B40AC-HL / B50AC-HL Forklift

HIGH LIFT

The Bendi B40AC-HL and B50AC-HL forklifts work in aisles as narrow as 78" (1.98M), have a starting capacity of 4,400 lbs (1996 kg) at 24" (600mm) load center and lift heights available to 41' (12.50M).

They are a 4-wheel articulating forklift with dual independently driven rear-drive tires and soft-poly front load tires. The Bendi B40AC-HL and B50AC-HL can work inside and outside on paved surfaces and have a floating front axle allowing the trucks to ride smoothly over uneven floors. They can do the same jobs as reach and counterbalanced trucks but in much narrower aisles.

EXCEPTIONAL PERFORMANCE AND MANEUVERABILITY

Equipped with the Landoll DuraSteerTM front wheel hydraulic steering, the B40AC-HL/B50AC-HL provides exceptional control and makes load placement and retrieval superior to the competition.

3-STAGE MAST

The new mast has a rigid mounting and as standard a tilting and side shifting carriage. The new design offers increased mast rigidity, capacity and improved visibility. Dual free lift cylinders and optimized hose and chain routings have improved visibility thru the mast. Lowered heights have been reduced and a new mounting position on the 42” (1067 mm) wide front axle reduces the distance from the face of the forks to the back of the axle thereby improving aisle performance.

Features may include:

4,400 lb. (1,996kg) and 5,000 lb. (2,268kg) Capacity at 24" (600mm) Load Center

Four-Wheel Design, Dual Rear Wheel Drive

Adjustable Seat and Steering Wheel

Integral 11.2" (285mm) Stroke Sideshifter and 36" (914mm) High Load Backrest

DuraSteerTM Front Wheel Hydraulic Steering Provides Smooth, Reliable, Long-Lasting Steering Control

Creep Speed Mode Adds Enhanced Control when Handling Loads at High Elevations or While Training Operators

High Visibility Mast Allows Optimum Safety and Control

Independently Controlled Rear Wheels Allow Independent Speed Control of Each Drive Tire Based on Steering Angle

AC Traction and Hydraulic Motors Ensure Minimal Maintenance and High Efficiency

High-Efficiency Curtis AC Controllers Provide Trouble Free Operation

Interactive LCD Status Monitor (BDI with Lift Interrupt, Hour Meter with Service Monitor, Diagnostic Code Display, Input Device Calibration)

48 Volt Electrical System

Motor

Motor Power Hydraulic Motor Rating - Continuous Duty: 12 kW | Drive Motor Rating - Continuous Duty: 2 x 7.5 15 Total kW

Wheels & Tires

Wheels Front (1 each): 15x6 in (381x152 mm) | Rear (2 each): 18x9 in (457x229 mm)

Operational

Operating Speed Travel - Loaded: 6.5 mph (10.5 kph) / Unloaded: 7 mph (11.3 kph) | Lift - Loaded: 90 fpm (27.4 mpm) / Unloaded: 110 fpm (33.4 mpm) | Lowering - Loaded: 100 fpm (30.5 mpm) / Unloaded: 90 fpm (27.4 mpm)

Operating Conditions Gradeability Unloaded: 15% / Loaded: 15%

Dimensions

Wheelbase 73 in (1,854 mm)

Overall Length To Face of Forks: 117 in (2,972 mm)

Height Cab Floor: 31.3 in (795 mm) | Overhead Guard: 89 in (2,261 mm) | Battery Compartment: 19.24 in (489 mm)

Seat Height 52 in (1,321 mm)

Width Chassis: 54 in (1,372 mm) | Front Axle: 44 in (1,118 mm)

Length Fork: 40 in (1,016 mm)

Capacities

Hitch Lift Capacity 5,000 lb (2,268 kg)

Weights

Weight With Battery: 19,340 lb (8,772 kg)

2024 Landoll B40AC-HL / B50AC-HL Forklift B50AC-HL